PVC

COMPOUNDS

TECHNICAL

INFORMATION

________________________________________________________________

GFA 61E

· APPLICATION : Bottles produced from GFA 61E are designed for use as packages as different as : cosmetics, alcohols (rum, vodka, ...). This compound offers an excellent processability on a wide range of extrusion blow molding machines.

· DESCRIPTION : GFA 61E is a high transparency, normal impact resistance compound designed for use in extrusion blow molding of small capacity bottles up to nearly 0,25 l, according to their characteristics.

· STABILIZATION : Tin.

· FORM : Granulate.

· MAIN STANDARD COLORATIONS : Purple shade crystal (C 5), purple shade crystal UV protection (CU 7), ....

· COMPLIANCE WITH FOOD PACKAGING REGULATIONS : Our compounds are in accordance with European Directives concerning : food contact packaging, management of packaging wastes and European Pharmacopoeia. They are also in accordance with the regulation of most the other countries (contact us). Our compounds do not contain plasticizer, consequently they do not contain phtalat.

· PHYSICAL PROPERTIES :

MAIN PROPERTIES

METHODS

UNITS

AVERAGE VALUE

— Apparent bulk density (granulate)

ISO R 60

g/cm³

0,77

— Specific Gravity of end product

ASTM D 792

—

1,38

— Volatile Matter

ISO R 1269

%

< 0,2

— VICAT softening point (under 50N)

ISO R 306

° C

77

— SHORE D Hardness

ISO R 868

D

79

— Tensile strength at break

ISO R 527

N / mm²

43

— Elongation at break

ISO R 527

%

140

— IZOD impact (Notched specimen - 23° C)

ISO R 180

KJ / m²

4

— Flexural modulus 23° C

ISO R 178

N / mm²

2500

IMPORTANT : All information in this no contractual document is based on test results and is given in good faith but without warranty or guaranty of any kind whatsoever.

DORLYL S.N.C. -CP 956 - 2, rue du Pont Colbert - 78009 VERSAILLES  Cedex-France -Tél. +33(0) 1.39.20.21.50- Fax +33(0) 1.39.20.21.51 - e-mail dorlyl.bb@wanadoo.fr