PVC
COMPOUNDS
TECHNICAL
INFORMATION
________________________________________________________________
GFE 63M
|
|
PVC COMPOUNDS |
TECHNICAL INFORMATION ________________________________________________________________ GFE 63M |
· APPLICATION : Bottles produced from GFE 63M are designed for use as packages for products as different as household products, cosmetics, body care, ...
·
DESCRIPTION : GFE 63M is a very high impact, frosted aspect compound for blow molding of medium capacity bottles (up to 0,5 l), according to their characteristics. Other grades are available for higher capacities.·
STABILIZATION : Tin.·
FORM : Powder and granulate.·
MAIN STANDARD COLORATIONS : Neutral crystal (C 3), purple shade crystal (C 5), ...·
COMPLIANCE WITH FOOD PACKAGING REGULATIONS : Our compounds are in accordance with European Directives concerning : food contact packaging, management of packaging wastes and European Pharmacopoeia. They are also in accordance with the regulation of most the other countries (contact us). Our compounds do not contain plasticizer, consequently they do not contain phtalat.·
PHYSICAL PROPERTIES :|
MAIN PROPERTIES |
METHODS |
UNITS |
AVERAGE VALUE |
|
— Apparent bulk density (granulate) |
ISO R 60 |
g/cm³ |
0,77 |
|
— Specific Gravity of end product |
ASTM D 792 |
— |
1,33 |
|
— Volatile Matter |
ISO R 1269 |
% |
< 0,2 |
|
— VICAT softening point (under 50N) |
ISO R 306 |
° C |
76 |
|
— SHORE D Hardness |
ISO R 868 |
D |
74 |
|
— Tensile strength at break |
ISO R 527 |
N / mm² |
39 |
|
— Elongation at break |
ISO R 527 |
% |
210 |
|
— IZOD impact (Notched specimen - 23° C) |
ISO R 180 |
KJ / m² |
20 |
|
— Flexural modulus 23° C |
ISO R 178 |
N / mm² |
2000 |
IMPORTANT : All information in this no contractual document is based on test results and is given in good faith but without warranty or guaranty of any kind whatsoever.
DORLYL S.N.C.
-134 rue du Point-du-Jour- 92772 Boulogne Billancourt Cedex-France -Tél. (33) 1.46.94.91.91- Fax (33) 1.46.94.91.92 - e-mail dorlyl.bb@wanadoo.fr